-> General Talk -> TOYOTA FAQ
Post new topic  Reply to topic View previous topic :: View next topic 
TOYOTA FAQ
PostPosted: Wed Oct 10, 2007 12:30 pm Reply with quote
CoonDogger
Golden Toyota Wrencher
Golden Toyota Wrencher
 
Joined: 02 Oct 2006
Posts: 4571




MODS please move this as needed or please make it a sticky.

Maybe this will help answer alot of the same questions.
Official 2.0 Toyota FAQ from PBB
http://www.pirate4x4.com/forum/showthread.php?t=775780


General Toyota FAQ's:
www.pirate4x4.com/forum/showthread.php?t=459180
www.yotatech.com/~corey/tech/techpage.htm
www.yotatech.com/~corey/4runner_faq.htm
www.yotatech.com/showthread.php?t=66255

AXLES:
TOYOTA 8": http://www.4crawler.com/4x4/CheapTricks/AxleTech/index.shtml
Toyota Component Strengths (D44/D60 too): http://www.pirate4x4.com/forum/showthread.php?t=350905&highlight=birfield+strength
D44's: http://www.4x4wire.com/forums/showflat.php?Cat=&Number=255906&page=3&view=collapsed&sb=5&o=&fpart=1.
D60's: http://www.pirate4x4.com/tech/billavista/60_front/index.html
D70's: http://www.pirate4x4.com/tech/billavista/D70/D70.htm
14 bolt: http://www.pirate4x4.com/tech/billavista/14b_bible/index.html
Hybrids: http://www.pirate4x4.com/tech/billavista/Hybrid_Axle/HybridAxle.htm
Rockwells: http://www.jpmagazine.com/techarticles/154_0305_ton/index.html
..........http://www.fourwheeler.com/techarticles/77419/

Heres some spring info about Toyota Leaf springs.


79-85 Toyota front
Flat length = 45"
Front Half = 22.5"
Rear Half = 22.5"
Width = 2.36"
Front Eyelet = 18mm ID
Rear Eyelet = 18mm ID


79-83 Toyota Rear
Flat length = 48"
Front Half = 21.125"
Rear Half = 26.875"
Width = 2.36"
Front Eyelet = 18mm ID
Rear Eyelet = 18mm ID


84-88 Toyota Rear
Flat length = 48"
Front Half = 20.5"
Rear Half = 27.5"
Width = 2.36"
Front Eyelet = 14mm ID
Rear Eyelet = 18mm ID


Stock Toyota Engine Improvements, etc...
22RE: http://www.4x4wire.com/forums/showflat.php?Cat=&Number=820891&page=&view=&sb=5&o=&fpart=1&vc=1

Engine Swaps into Toyotas:
General: http://www.mindspring.com/~jayk3/toyota/swaps.htm
.......... http://www.pirate4x4.com/forum/showthread.php?s=&threadid=175795
Buick 231: http://www.off-road.com/toyota/buick_v6_swap.html
Chevy 4.3: http://www.off-road.com/toyota/tech/other/v6swap.html
Chevy 350:
Ford 302/351: http://www.yotatech.com/showthread.php?t=72065
Toyota 3.4 V6: http://www.yotatech.com/showthread.php?t=82145
.......... http://www.yotatech.com/showthread.php?t=81553
Toyota 5M/7M: http://www.4x4wire.com/toyota/tech/supra/
.......... http://4x4.4t.com/4runner/7mswap.htm
.......... http://www.off-road.com/toyota/tech/supraswap/
.......... http://www.supracharged.com/forum/viewtopic.php?t=298
Toyota V8: http://www.yotatech.com/showthread.php?t=54771
Toyota Diesel (1KZ-TE): http://www.yotatech.com/showthread.php?t=77103

Transfer Cases:
Double Toy Cases: http://www.fourwheeler.com/techarticles/129_0207_case/index.html
.......... http://www.marlincrawler.com/docs/dualcase/install.html
Double NP Cases: http://medusa.ih8mud.com/NP205/Doubler.html
Toy Cases Info: http://www.fourwheeler.com/techarticles/129_0207_case/index.html
NP Cases Info: http://www.off-road.com/chevy/tech/transfercaseguide/

Suspensions:
SASing: http://www.yotatech.com/showthread.php?t=73430
..........http://www.yotatech.com/showthread.php?t=73882
..........http://www.tacomaterritory.com/forum/forumdisplay.php?f=7
Chevy 63" Rear Swap: http://www.yotatech.com/showthread.php?t=71759
..........http://www.pirate4x4.com/tech/chevyswap/index.html
..........http://www.pirate4x4.com/forum/showthread.php?s=&threadid=20665
4Links: http://4wheeloffroad.com/techarticles/suspension/131_0306_link/
Coil Conversions:

_________________
Political correctness: A doctrine fostered by a delusional illogical liberal minority and rabidly promoted by an unscrupulous liberal press which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.
View user's profile Send private message Send e-mail
PostPosted: Wed Oct 10, 2007 12:37 pm Reply with quote
vanguard
Global Warmer
Global Warmer
 
Joined: 21 Oct 2005
Posts: 6432




Ok, I've made it a sticky post thereby assuring that nobody will ever read it. Nasty

_________________
05 buggy
Places to wheel
Why do you keep putting gear oil in that axle? It's obvious that it doesn't like it. --Max
View user's profile Send private message Send e-mail Visit poster's website
Re:
PostPosted: Wed Oct 10, 2007 12:54 pm Reply with quote
CoonDogger
Golden Toyota Wrencher
Golden Toyota Wrencher
 
Joined: 02 Oct 2006
Posts: 4571




vanguard wrote:
Ok, I've made it a sticky post thereby assuring that nobody will ever read it. Nasty



Is that the truth? People don't read sticky's? Well, move it back. Very Happy

_________________
Political correctness: A doctrine fostered by a delusional illogical liberal minority and rabidly promoted by an unscrupulous liberal press which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.
View user's profile Send private message Send e-mail
PostPosted: Wed Oct 10, 2007 4:58 pm Reply with quote
UNBREAKABLE
Golden Toyota Wrencher
Golden Toyota Wrencher
 
Joined: 12 Sep 2005
Posts: 5308




sh&%t....I got all that memorized...I've had all those engines in my truck Laughing

_________________
Sellin' out.
View user's profile Send private message Send e-mail
Re:
PostPosted: Wed Oct 10, 2007 4:59 pm Reply with quote
bthelton
Level 1 Contributor
Level 1 Contributor
 
Joined: 23 Dec 2006
Posts: 1173
Location: Hickory




UNBREAKABLE wrote:
sh&%t....I got all that memorized...I've had all those engines in my truck Laughing


And still don't know how to work on them Very Happy
View user's profile Send private message Send e-mail
Re:
PostPosted: Wed Oct 10, 2007 6:00 pm Reply with quote
CoonDogger
Golden Toyota Wrencher
Golden Toyota Wrencher
 
Joined: 02 Oct 2006
Posts: 4571




UNBREAKABLE wrote:
sh&%t....I got all that memorized...I've had all those engines in my truck Laughing



Now, that is funnay!

_________________
Political correctness: A doctrine fostered by a delusional illogical liberal minority and rabidly promoted by an unscrupulous liberal press which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.
View user's profile Send private message Send e-mail
PostPosted: Wed Oct 10, 2007 6:11 pm Reply with quote
imprttuner88
Level 1 Contributor
Level 1 Contributor
 
Joined: 21 Jun 2006
Posts: 225
Location: Wilmington, NC




this is great for people like me!

_________________
81' Toyota Longbed

06' Toyota 4Runner SR5 V6
-Strona Bull Bar
-Eclipse CD7100 w/Sirius and Ipod adapter

wannabe wheeler

NCSU C/O 99'
View user's profile Send private message AIM Address First Name
PostPosted: Thu Jan 24, 2008 9:09 pm Reply with quote
zosimov21
Admin
Admin
 
Joined: 31 Aug 2005
Posts: 4408




Transmissions

Pickup and 4Runner Transmissions with 1st gear ratios.
L43 4 speed 79 - 80 3.67
L45 4 speed 81 - 82 3.93
L50 5 speed 81 - 82 3.93
L52 5 speed 83 3.93
G52 & G54 5 speed 84 - 88 (Carb) 3.93
W56 5 speed 85 - 95 (EFI) 3.95 Manual Hub Equipped Vehicles 89 and up Have W56, 89 and up ADD vehicles have G58.
R151F 5 speed 86 - 87 (turbo only) 4.31
G58 5 speed 89 - 95 3.93 ADD Equipped Vehicles
R150F (6 cyl) 5 speed 88+ 3.83

Identification:
G52/54 84-88' are twin stick, use a 8 bolt center section, 6 bolt gear t/case pattern, 21 spline output.
G58 89-95' twin stick, 8 bolt center, 9 bolt chain t/case, 26 spline
W56 85-88' (single stick), 89-95' (twin stick), 10 bolt center, 6 bolt t/case, 21 spline
R151F 86 - 87 (turbo only) will have two housings of four bolts each just like a G52, the difference would be the large rubber plug on the bottom of the bellhousing.

Info provided by Marlin Cralwer
All 84 to 95 22R trans are 25.5" long including the bellhousing. The only shorter trans is the 79-83 year trans which are 20.75" long with bellhousing. These early short trans have had a poor service record due in part to their small bearings and lighter gears. The 82-83 L52 5 speed which had a 80 x 20 mm front input bearing has had the best service record. A number of years ago, I invented a way to install a oversize 80 x 23 mm input bearing with an inproved gear set which features a greater helix angle for added strenght. I call it my L52HD and is the strongest 20.75" long trans.

Side note:
ADD = Automatic Differential Disconnect
For more information see my article here:
http://www.off-road.com/toyota/tech/add/index.htm

Tranny 1st 2nd 3rd 4th 5th Rev
R151f 4.310 2.740 1.930 1.000 0.830 4.230
W56 3.954 2.141 1.384 1.000 0.850 4.091
G52 3.929 2.333 1.452 1.000 .851 ????
FYI: Marlin offers a R151f gear swap that gives 5.15 first

List of Toyota transmissions which covers all toy trans 2wd, fwd, automatic, car, truck
http://en.wikipedia.org/wiki/Toyota_transmissions

A340 Transmission issues and FAQs
http://www.pirate4x4.com/forum/showthread.php?t=587521

_________________
View user's profile Send private message Visit poster's website AIM Address
Chevy 1 wire tech
PostPosted: Tue Jun 02, 2009 12:35 pm Reply with quote
zosimov21
Admin
Admin
 
Joined: 31 Aug 2005
Posts: 4408




If you go to Napa, part# 134011sw or 2134011sw will work

If you go somewhere else, tell them its a Lester brand part #7127se and any parts store should be able to cross that over to whatever brand they sell

Or tell them its 77 Chevrolet c10 with a 350, that ought to work too. Any fullsize car or truck from about 72 or 73 up into the 80s should work....

If you got the bracket from bud, a napa # 25-7390 belt works, or anywhere else tell them xl 7390.


Boom, there's my tech for the day Laughing
Thanks to Kyle for the info

_________________
View user's profile Send private message Visit poster's website AIM Address
TOYOTA FAQ
-> General Talk
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  







Powered by phpBB © 2001-2003 phpBB Group
Theme created by Vjacheslav Trushkin